Become a premium member for just $10 your first year - deal ends December 31.

2007 Edo Competition 911 Turbo

There may be a new model out on the streets, but Porsche’s 996 Turbo is still an amazing performance machine with massive tuning potential. Germany’s Edo Competition has applied its magic touch to the potent coupe, which thanks to the assortment of power upgrades churns out a supercar-rivalling 585hp and 780Nm of torque.

Top speed is now rated at 345km/h while acceleration times for the 0–100km/h sprint is just 3.7 seconds with 0-200km/h done in 9.9 seconds. To attain this level of performance, engineers had to add a new turbocharger for added boost pressure and then bolt on some breathing mods. These include low restriction induction and exhaust components such as the BMC-Sport air filter and stainless-steel exhaust kit with a Tri-alloy cat converter. And to cope with the power jump, the tuners had to apply a heavy-duty sport clutch kit.

Extra stopping power was then called for, so engineers added Edo’s own Sport-brake system with 370mm discs and six-piston-single block callipers up front. At the rear is a pair of smaller 342mm discs and four-piston units, with all cables replaced with steel flex brake lines. Other additions to the car’s rolling stock include 18in racing wheels huge 315mm rubber at the back and an RDK-tyre pressure control system.

Finally, attention was turned to the car’s aerodynamic package. New additions include a front spoiler lip with protective grille as well as a tail lid spoiler from the 996 GT2.

In Detail

tags 996
submitted by Richard Owen
type Professionally Tuned Car
built at Germany
engine Aluminum M96/70S Flat-6
position Rear Longitudinal
aspiration Borg Warner Variable Turbine Geometry (VTG) Twin Turbos
valvetrain DOHC, 4 Valves per Cyl
fuel feed Bosch Motronic DME 7.8 Fuel injection
displacement 3596 cc / 219.4 in³
bore 100 mm / 3.94 in
stroke 76.4 mm / 3.01 in
compression 9.0:1
power 436.2 kw / 585 bhp
specific output 162.68 bhp per litre
torque 779.6 nm / 575 ft lbs
body / frame Unit Steel
driven wheels 4WD w/PSM, PTM
wheelbase 2350 mm / 92.5 in
front track 1490 mm / 58.7 in
rear track 1548 mm / 60.9 in
length 4450 mm / 175.2 in
width 1852 mm / 72.9 in
height 1300 mm / 51.2 in
transmission 6-Speed Manual or 5-Speed Tip-Tronic
0 – 60 mph ~3.7 seconds