Become a premium member for just $10 your first year - deal ends December 31.

2003 Bentley Speed 8

For their 2003 assault on Le Mans, all of the Volkswagen-Audi Group’s efforts were focused on the Bentleys which benefited from the same talent that brought Audi to victory in years previous. This included the very capable Team Joest and star Audi drivers such as Rinaldo Capello and Tom Kristensen.

The result was a resounding 1-2 at Le Mans with the the winning #7 car driven by Rinaldo Capello, Tom Kristensen and Guy Smith. Just behind them was the #8 Bentley of Mark Blundell, David Brabham and Johnny Herbert.

After winning Le Mans the Bentley program was halted.

2003 Press Release

London, 4th February 2003… It is no exaggeration to describe the Bentley Speed 8 Le Mans GT prototype that will race at both Sebring and Le Mans as a new car. Though the previous two generations of Speed 8 performed spectacularly well, returning Bentley to the Le Mans podium in 2003, it was felt that for the final year of the three-year programme, a fresh approach was required.Clearly the car still features enclosed bodywork meaning it remains in a class of its own and the engine retains its basic architecture, 4-litre capacity, direct fuel injection and twin turbochargers. In all other significant respects it is a new design from the ground up.

The concept driving the design was to ensure much better exploitation of the airflow over the body and particularly to the rear wing. To achieve this, the external cockpit area has been much reduced – though the car is actually more spacious inside – making a smaller hole in the air and allowing the car to use a much smaller, more aerodynamic engine cover.

In addition, the air-intake that had sat on top of the car in previous generation Speed 8s has been deleted in favour of ‘snorkel’-type intakes on the sides of the car. This not only further increases the efficiency of the air-flow over the car, it also lowers the height of the car, lending it a much more sleek, aggressive appearance. Early testing results have indicated that not only does the 2003 Speed 8 have a more favourable downforce to drag ratio than its predecessor, it also offers much more consistent aerodynamic performance in all conditions making the car both quicker and easier to drive.

Underneath the new skin the 4-litre engine has been re-engineered around the new regulations for 2003 that dictated a ten per cent reduction in engine restrictor size across all classes competing at Le Mans. It has been necessary to redesign many internal engine components as well evolve a new electronics strategy for the engine to minimise the shortfall in power that the new regulations will bring to all competing teams.

The suspension has been entirely redesigned as well, partly to improve further its behaviour, but also so it can be adapted to suit its new Michelin tyres. All the geometry has been changed even the mounting points of the rear suspension on the gearbox.

This alone has necessitated a new gearbox casing for the Speed 8. As in previous generations of Speed 8, the internals are supplied by Xtrac and continue to operate with their customary reliability.

The testing programme has proceeded apace. The autumn was spent doing extensive tyre testing, benchmarking the new Michelin tyres and determining how best to exploit their performance. These tests were conducted with a 2002-specification EXP Speed 8. Early in the New Year, the first of the 2003 Speed 8s was shaken down successfully at Snetterton before heading off to the circuits of Europe for an extensive test programme prior to Sebring.

Bentley Team Director John Wickham commented: ‘The new car clearly has great potential, the drivers are very happy with the progress we are making, particularly its aerodynamic balance. As with all Bentleys we have run in the last two seasons, reliability appears to have been ‘designed in’. It’s early days but so far we have had no reliability issues with the car whatsoever.’

Andy Pope, speaking for Michelin, said: ‘The first few weeks of our association with Bentley have been extremely encouraging. We have not recently made tyres in the sizes dictated by the LM GTP class, but we appear to have found our feet very quickly and are able to supply Team Bentley with tyres that are quick, consistent and durable.’

2003 Bentley Speed 8 Gallery

See full 2003 Bentley Speed 8 Gallery here

In Detail

type Racing Car
built at Norfolk, England
body stylist Peter Elleray
coachbuilder Racing Technology Norfolk
production 5
engine Audi V8
position Mid Longitudinal
valvetrain DOHC, 4 Valves per Cyl
fuel feed Direct Injection
displacement 4000 cc / 244.1 in³
power 447.4 kw / 600 bhp
specific output 150.0 bhp per litre
bhp/weight 666.67 bhp per tonne
torque 799.9 nm / 590 ft lbs @ 7500 rpm
body / frame Stressed Carbon-Fibre Monocoque
driven wheels RWD
wheel type O.Z. Forged Magnesium
front tires Michelin Radial
rear tires Michelin Radial
front brakes Ventilated Carbon Fiber Discs w/6-Piston AP Racing Calipers
rear brakes Ventilated Carbon Fiber Discs w/6-Piston AP Racing Calipers
front wheels F 45.7 x 31.1 cm / 18 x 12.25 in
rear wheels R 45.7 x 33.0 cm / 18 x 13 in
steering Rack & Pinion w/Power Assist
f suspension Double Wishbones w/Torsion Bar Springs, Telescopic Dampers
r suspension Double Wishbones w/Torsion Bar Springs, Telescopic Dampers
curb weight 900 kg / 1984 lbs
wheelbase 2735 mm / 107.7 in
length 4645 mm / 182.9 in
width 1990 mm / 78.3 in
transmission Xtrac 6-speed Sequential
tran clutch AP Racing
top speed ~346.0 kph / 215.0 mph
fuel capacity 90 litres or 23.76 gal.